Injection Valve
|
|
Used for generating pressure and preventing backflow. |
Remember
|
Back Pressure Valve
|
|
Used to generate a constant back pressure for precise dosing and/or to protect against overdosing, or for dosing accuracy with an open discharge or a positive pressure on the suction side. Used with pulsation dampeners to produce low-pulsation dosing. |
Remember
|
Foot valve
|
|
For connection at the end of the suction line. Used to create pressure and to prevent return flow. Important: Injection valves are not intended as completely sealed units. |
Remember
|
Float Switch
|
|
Float switches enable problem-free and flexible integration of metering pumps into automatic control loops. |
Remember
|
Suction Assembly
|
|
For ProMinent® solenoid pumps consisting of foot valve, adjustable retaining tube with screw connection and intake line. |
Remember
|
Suction Lance
|
|
Consisting of foot valve, retaining tube and screw connection, intake hose. |
Remember
|
Suction and discharge pipe
|
|
for metering pumps and accessories. We recommend using the original lines to ensure the mechanical connection in case of clamping ring fittings as well as compressive strength and chemical resistance. On request, food grade version is possible. |
Remember
|
Control Cable
|
|
Control cables enable problem-free and flexible integration of metering pumps into automatic control loops. |
Remember
|
Relief Valve
|
|
The relief valve protects all system components against damage due to pressure overload. |
Remember
|
Wall Mounting Bracket
|
|
With fixtures, to hold one metering pump. |
Remember
|
Flow Meter DulcoFlow®
|
|
Operates based on the ultrasonic measurement method. Media contacting parts manufactured using chemically resistant PVDF. Therefore, aggressive media can also be measured without problem. Installed directly in the pipe of the medium being measured. |
Remember
|