Back to the results list

DULCO flex Control

Bild vergrößern

The new DULCO flex Control meters reliably and is simple to operate. It enhances the ProMinent product range with an intelligent peristaltic metering pump. ProMinent is making use of its decades-long experience in the metering pump sector to bring together the best of two worlds. Valve-free metering with the accuracy of a diaphragm metering pump, with full use of the properties of a peristaltic pump. The applications of this metering pump include gaseous, high-viscosity, abrasive, shear-sensitive or chemically aggressive fluids.

The dosing head, developed and patented by ProMinent, makes a quick, unique and straightforward tube replacement possible. The display provides the Service Technician with precise instructions about the steps to be completed when replacing the tube. The high-performance tube used is made from a thermoplastic vulcanisate (TPV) and guarantees exceptional chemical resistance and long service life.

The order information required for the replacement of the tube can be found on the pump’s operating menu.

The intuitive user interface with clickwheel ensures the simple operation of the peristaltic pump.

A brushless DC motor forms the heart of the DULCO flex Control. Its ingenious control provides for precise metering and reduced pump capacity with continuous metering up to 10 ml/h. What’s more, the new peristaltic metering pump is IoT-enabled, meaning that it is fully connectible and can be connected to ProMinent’s in-house developed DULCOnneX platform, which enables it to work even smarter.

  • Illuminated 3” LCD and 3-LED display for operating, warning and error messages, visible from all sides
  • Adjustable feed rate between 30 l/h and 10 ml/h
  • Connector for 2-stage level switch or continuous level measurement
  • 3 additional freely configurable inputs and outputs on a port
  • Optional relay module with 1 x switchover contact, 230 V – 8 A
  • Optional relay module with 2 x On, 24 V – 100 mA
  • Pump is available as an FDA design
  • DULCOnneX-enabled
  • Connection to process control systems via a BUS interface, such as PROFIBUS®, Profinet or CAN bus
  • CIP (cleaning in place)-enabled system
  • Reverse flow is possible
  • Integrated 1-month timer
  • Adjustment of the metering rate directly in l/h or gph
  • Simple tube change
  • No problems with very gaseous media or air locks
  • Suitable for viscosities of up to 10,000 mPas
  • Sole contact with media in the tube
  • Many different control options, such as using an analogue 0/4-20 mA signal, contact controller or via process control systems
Remember pump